Viewing 2 reply threads
  • Author
    Posts
    • #1947

      abdo
      Participant

        I am testing the range between two iot747 devices,

        I am tryign with LE Unicast UTXV and UTXM,

        At a certain distance the audio stream is down but when I decrease the distance between the two devices the audio stream doesn’t recover,

        I am not receiving any error message on the terminal and if I write STATUS on both devices I get that they are still connected,

        Is there anyway to fix this issue, basically either get a notification so I can close and reopen the connection or an automatic reconnect.

        config on initiator:

        config
        AUDIO=0 0
        AUDIO_ANALOG=9 15 1 OFF
        AUDIO_DIGITAL=0 44100 64 00100100 00000000
        AUTOCONN=0 3
        AUTO_DATA=OFF OFF
        BATT_CONFIG=OFF OFF OFF 3000 4200 10 1470 45 200
        BCAST_CONFIG=223344 48 2 2 40000 OFF 2
        BT_CONFIG=1 1 1
        BLE_CONFIG=250 ON OFF 2 0 1A 0 245DFC020000
        BLE_CUSTOM_DB=OFF
        CMD_TO=20
        COD=240404
        CODEC=OFF OFF OFF OFF OFF OFF OFF ON ON
        DEEP_SLEEP=OFF ON
        GPIO_CONFIG=ON 00
        HFP_CONFIG=ON OFF 5 ON OFF ON OFF
        LINK_CONFIG=OFF OFF
        LOCAL_ADDR=245DFC02155E
        MIX_AUDIO=OFF OFF
        MUSIC_META_DATA=OFF
        NAME=AA-02155E
        NAME_BCAST=AA-02155E
        NAME_SHORT=AA-02155E
        POWERMAX=11
        PROFILES=ON 2 2 2 2 2 2 2
        SPP_UUID=00 00 11 01 00 00 10 00 80 00 00 80 5F 9B 34 FB
        SSP_CAPS=3
        UART_CONFIG=9600 ON 0
        UCAST_CONFIG=0 48 2
        UI_CONFIG=OFF OFF ON ON ON ON 0 ON
        VOLUME_CONTROL=ON 127 ON
        OK

        config on the receiver:
        config
        AUDIO=0 0
        AUDIO_ANALOG=9 15 1 OFF
        AUDIO_DIGITAL=0 44100 64 00100100 00000000
        AUTOCONN=0 3
        AUTO_DATA=OFF OFF
        BATT_CONFIG=OFF OFF OFF 3000 4200 10 1470 45 200
        BCAST_CONFIG=223344 48 2 2 40000 OFF 2
        BT_CONFIG=1 1 1
        BLE_CONFIG=250 ON OFF 2 0 1A 0 245DFC020000
        BLE_CUSTOM_DB=OFF
        CMD_TO=20
        COD=240404
        CODEC=OFF OFF OFF OFF OFF OFF OFF ON ON
        DEEP_SLEEP=OFF ON
        GPIO_CONFIG=ON 00
        HFP_CONFIG=ON OFF 5 ON OFF ON OFF
        LINK_CONFIG=OFF OFF
        LOCAL_ADDR=245DFC021557
        MIX_AUDIO=OFF OFF
        MUSIC_META_DATA=OFF
        NAME=AA-021557
        NAME_BCAST=AA-021557
        NAME_SHORT=AA-021557
        POWERMAX=11
        PROFILES=ON 2 2 2 2 2 2 2
        SPP_UUID=00 00 11 01 00 00 10 00 80 00 00 80 5F 9B 34 FB
        SSP_CAPS=3
        UART_CONFIG=9600 ON 0
        UCAST_CONFIG=0 48 2
        UI_CONFIG=OFF OFF ON ON ON ON 0 ON
        VOLUME_CONTROL=ON 127 ON
        OK

        Thank you,
        Abdo

      • #1950

        IOT747 Team
        Keymaster

          Hi,

          I tested and I do get:

          CLOSE_OK 14 BLE 245DFC021572
          LC3_VOICE_STOP 19
          CLOSE_OK 19 UTXV 245DFC021572

          On both sides when I have a Link Loss.

          Can you recheck that you don’t get this?

          IOT747

          • #1952

            abdo
            Participant

              Hi,

              Thank you for your reply,
              I was on an old firmware version, I tested it on v3.1.70, I am getting notifications on link loss,

              But is there a way both devices can reconnect automatically,
              Let me explain more my setup so I am connecting only two devices using Unicast UTXM bidirectional audio stream (I am using gaming mode),
              and I want this to be a reliable robust connection and I need it to reconnect in case of link loss,

              Any suggestion?

              Thank you,
              Abdo

              • This reply was modified 1 month, 2 weeks ago by abdo.
          • #1955

            IOT747 Team
            Keymaster

              Hi,
              For now, you would need to reopen the connection from the transmitter when you see a CLOSE notification.
              IOT747

          Viewing 2 reply threads

          You must be logged in to reply to this topic.