Tagged: , ,

Log In Register Lost Password
Viewing 2 reply threads
  • Author
    Posts
    • June 4, 2026 at 3:31 am #2496

      Bruce_Dediprog
      Participant

        Hi,

        We are IC programmer company and we are studying to program/update FW with multiple IDC767-1 in parallel.
        We hope to do it through IDC767-1’s UART interface.
        The IDC767-1 q’ty will be 1~48 with one PC and we have below questions,

        1. Does the DFU SW support to control multiple IDC767-1 in parallel?
        2. Does the DFU SW support API/DLL if it support to control multiple IDC767-1 in parallel? API/DLL is required to integrate with our SW.
        3. Does IOT747 support other way to program/update the FW withour DFU SW? Ex: AT command or dedicated vendor command on UART interface.

        Thanks,
        Bruce

      • June 4, 2026 at 6:04 am #2499

        IOT747 Team
        Keymaster

          Hi Bruce,

          The Windows DFU tool does not allow parallel processing.

          However, if you sign an NDA (Our NDA is under Support/Documents at https://www.iot747.com/download/iot747-standard-nda-form/), we can share the source code of the python script that does the DFY over UART. Usually we share with customers so they can integrate on their host processor. But in your case, you can run it on your laptop and modify it to use mmultiple UART and do parallel upgrades.

          IOT747 Support

        • June 5, 2026 at 6:40 am #2500

          Bruce_Dediprog
          Participant

            Thanks for the information and it help us to evaluate the suitable solution.

        • Author
          Posts
        Log In Register Lost Password
        Viewing 2 reply threads

        You must be logged in to reply to this topic.