loris_ts

[loris_ts]

Hello,

We are very interested in these options. Is it possible to test these commands on our own evaluation board ? Do I need to update the firmware ?

Thank you for your help.

Loris

[loris_ts]

Hello,

Sorry, I have finally found the software to program the memory using the file you sent me. Thank you.

Loris

[loris_ts]

Hello,

Thank you for the document. The feature works very well and meets our needs. 

Loris

[loris_ts]

Hello, 

I was able to carry out several tests using these new commands. 

When making an announcement, is there a way to broadcast the same audio source to all four subgroups (e.g. a voice announcement that should be heard on all receivers) ? Or select the audio source corresponding to the advert? (e.g. subgroup 1) ?

Thank you for your help.

Loris

[loris_ts]

The idea is to be able to broadcast a general announcement over each stream to avoid having to modify the subgroups.

When the broadcaster issues the ‘Announce’ command, the broadcast takes priority (works perfectly) and mutes the audio on each stream (music). The announcement is sent via I2S to the IDC777 module, and I would like to be able to broadcast it to all subgroups (currently only subgroup 1 and subgroup 2).

Let me know if that’s still not clear.

Thank you 

Loris

[loris_ts]

Hi, 

Yes exactly that setup. If i do Announce, all subgroups has priority over A2DP. And each one plays the audio (music) associated with that subgroup. It works well, just as you expected.

But my aim would be to be able to broadcast an announcement (voice announcement) across all four subgroups at the same time.

I am not sure if it is possible to do something like that. For example, when I use the Announce command, I would like to be able to choose the audio source to play on the BIG. For example, like the Music command when I select the audio stream to play (music 1a play 1). 

And so to have a command such as “Announce 18 10 1”, where 1 is the index of the announcement source.

Thank you for your feedback.

Loris

[loris_ts]

Hi,

Yes thank you, I’m trying to find a solution using the “SEND” command. I think that might work.

Loris

[Author]

Posts